lead-free parts pb doc. no : qw0905-lhrf9033/tr1 rev. : a date : 29 - oct. - 2008 surface mount tape and reel ligitek electronics co.,ltd. property of ligitek only lhrf9033/tr1 data sheet
0.5 0.1 2.0 0.4 0.1 1.9 2.0 4.0 4.0 1.5 1.4 0.4 0.7 9.3 0.16 2.8 4.85 12 0.3 5.5 1.75 3.32 4.6 0.5 2.5 cathode part no. lhrf9033/tr1 note : the tolerances unless mentioned is 0.2mm,angle 0.5. unit=mm. note : 1.all dimension are in millimeter tolerance is 0.2mm unless otherwise noted. 2.specifications are subject to change without notice. polarity carrier type dimensions package dimensions 1/7 page ligitek electronics co.,ltd. property of ligitek only 0.3 2.16
2/7 74.0 1.5 178 2.0 14.2 1.0 16.0 1.0 ligitek electronics co.,ltd. property of ligitek only page reel dimensions 1500 devices quantity/reel 12.0mm tape,7"reel description lhrf9033/tr1 part no. part no. lhrf9033/tr1
3/7 1.52.4 water clear red algainp lhrf9033/tr1 page unit ma ma mw a hrf ratings symbol 30 90 75 10 i f i fp pd ir parameter forward current peak forward current duty 1/10@10khz power dissipation reverse current @5v absolute maximum ratings at ta=25 ligitek electronics co.,ltd. property of ligitek only viewing angle 2 1/2 (deg) 110020 typ. -40 ~ +85 -40 ~ +100 t opr tstg operating temperature storage temperature typical electrical & optical characteristics (ta=25 ) spectral halfwidth nm forward voltage @20 ma(v) 20 min.max. dominant wave length dnm 630 lens material emitted part no note : 1.the forward voltage data did not including 0.1v testing tolerance. 2. the luminous intensity data did not including 15% testing tolerance. color luminous intensity @20ma(mcd) 700 min. part no. lhrf9033/tr1 electrostatic discharge( * ) esd v 2000
r e l a t i v e i n t e n s i t y @ 2 0 m a 600 wavelength (nm) 550 0 700 650 0.5 0.5 r e l a t i v e i n t e n s i t y @ 2 0 m a n o r m a l i z e @ 2 5 f o r w a r d v o l t a g e @ 2 0 m a n o r m a l i z e @ 2 5 20 ambient temperature( ) fig.5 relative intensity vs. wavelength 1.0 ambient temperature( ) 0.8 -0 -20 -4060 40 2080100 0 -40-20-060 4080100 fig.4 relative intensity vs. temperature 2.5 1.0 0.9 1.1 1.5 1.0 2.0 fig.3 forward voltage vs. temperature 1.2 3.0 100 r e l a t i v e i n t e n s i t y n o r m a l i z e @ 2 0 m a f o r w a r d c u r r e n t ( m a ) forward current(ma) forward voltage(v) 1.5 1.0 0.1 2.5 2.03.01.010 0 1.0 10 0.5 1.0 1.5 2.0 1001000 fig.2 relative intensity vs. forward current fig.1 forward current vs. forward voltage 1000 3.5 2.5 typical electro-optical characteristics curve ligitek electronics co.,ltd. property of ligitek only 3.0 hrf chip page 4/7 part no. lhrf9033/tr1
5/7 soldering heat max. 260 5sec 120 ~ 150 60 ~ 120 sec 120 ~ 180 sec 245 5 within 5 sec preheat cooling -5 /sec 260 c max. 10sec.max 1~5 c/sec time rising +5 /sec preheat 150 3-1. lead reflow solder 240 temp. ( ) 3-2 pb-free reflow solder 120 above 220 c 60 sec.max. 1~5 c/sec 120 sec.max. reflow soldering should not be done more than two times. preheat 180~200 c 2. wave solder recommended soldering conditions 1. hand solder basic spec is Q 280 3 sec one time only. page ligitek electronics co.,ltd. property of ligitek only part no. lhrf9033/tr1
6/7 page ligitek electronics co.,ltd. property of ligitek only circuit model b precautions for use: storage time: 1.the operation of temperatures and rh are : 5 ~35 ,rh<60%. 2.once the package is opened, the products should be used within a week. otherwise, they should be kept in a damp proof box with descanting agent. considering the tape life, we suggest our customers to use our products within a year(from production date). 3.if opened more than one week in an atmosphere 5 ~ 35 ,rh<60%, they should be treated at 60 5 fo r 15hrs. circuit model a drive method: led is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. this current limiting typically takes the form of a current limiting resistor placed in series with the led. consider worst case voltage variations than could occur across the current limiting resistor. the forwrd current should not be allowed to change by more than 40% of its desired value. esd(electrostatic discharge): static electricity or power surge will damage the led. use of a conductive wrist band or anti-electrosatic glove is recommended when handing these led. all devices, equipment and machinery must be properly grounded. cleaning: use alcohol-based cleaning solvents such as isopropyl alcohol to clean the led. (a) recommended circuit. (b) the difference of brightness between led could be found due to the vf-if characteristics of led. ledled part no. lhrf9033/tr1
7/7 reference standard mil-std-883d:1008 jis c 7021: b-10 mil-std-750d: 1026 mil-std-883d: 1005 jis c 7021: b-1 high temperature storage test operating life test test item 1.ta=under room temperature as per data sheet maximum rating. 2.if=20ma 3.t=1000 hrs (-24hrs, +72hrs) 1.ta=105 5 2.t=1000 hrs (-24hrs, +72hrs) test condition mil-std-202f:103b jis c 7021: b-11 jis c 7021: b-12 mil-std-202f: 107d mil-std-750d: 1051 mil-std-883d: 1011 mil-std-202f: 107d mil-std-750d: 1051 mil-std-883d: 1010 jis c 7021: a-4 mil-std-750d:2031.2 j-std-020 mil-std-202f: 208d mil-std-750d: 2026 mil-std-883d: 2003 iec 68 part 2-20 jis c 7021: a-2 1.ta=65 5 2.rh=90%~95% 3.t=1000hrs 2hrs solderability test high temperature high humidity storage test thermal shock test ir reflow temperature cycling 1.t=260 xc max. 10sec.max. 2. 6 min 1.t.sol=235 5 2.immersion time 2 0.5sec 3.coverage R 95% of the dipped surface 1.105 ~ 25 ~ - 55 ~ 25 30mins 5mins 30mins 5mins 2.10 cyeles 1.ta=105 5 &-40 5 (10min) (10min) 2.total 10 cycles 1.ta=-40 5 2.t=1000 hrs (-24hrs, +72hrs) low temperature storage test environmental test endurance test classification reliability test: ligitek electronics co.,ltd. property of ligitek only page part no. lhrf9033/tr1
|
